Yes of course replacement Clax Crates are available. If you would like to email [email protected] with your location we will give you details of your local Clax Distributor.
The best castors for this application would be a grey elastic rubber non marking castor with the right weight capacity for your application, normally the larger the diameter the easier the starting and pushing effort we would be happy to access the product for the castor requirement and advise.
The best castors for this application would be a grey elastic rubber non marking castor with the right weight capacity for your application, normally the larger the diameter the easier the starting and pushing effort we would be happy to access the product for the castor requirement and advise.
Rubbermaid Microfiber cloths can be laundered up to 500 times without the use of bleach or 200 times with bleach. They also withstand up to 90 degree hot water for bleach-free sanitation.
Traditionally pallets are an Australian concept by Chep of a size 1165 x 1165mm, with boards both top and bottom. Skids or Euro pallets are designed without the bottom boards only boards on top. This makes them easier to pick up with many devices. Skids or Euro pallets are available in many sizes and various weight capacities.
The best type of wheels to use on grass areas would be a pneumatic type wheel. This is a Tyre with a tube inside and is filled with air. Generally it is best to have a wide tread pattern for best traction on softer grass areas.
Plastic Molded trolleys are generally the traditional style of mass production. Pieces of different grade of plastic are forced into a mold to create mass produced components. The different grades of plastic over the years, has shown up a lot of inconsistencies in trolley construction many of these styles of trolley do break and crack under impact e.g. assembly. Structural foam construction has air pockets blown into the mold making the construction of the trolley lighter and also its claimed to be stronger. Our experience with these trolleys from China, Taiwan and the USA does not suggest any of the claims made.
One point watering system for lead acid batteries, makes battery maintenance easy with a full line of single point battery watering systems. It allows you to fill batteries faster, safer and more reliably than ever before with one point on-board watering systems.
Each application specific system consists of automatic shut off valves interconnected with tubing that replace the existing vent caps. A quick coupling allows the system to be connected to a water supply. Once connected, water flows into each cell until it reaches the correct level. The entire process takes just 30 seconds per vehicle or battery pack arrangement.
This system removes the need to inspect each individual battery cell and water level and reduces the risk of contact with battery acid and battery terminals.
Battery electric vehicles should be charged when batteries are discharged to approximately 80%. To obtain optimum charging, 12 hour charge cycle is preferred. Vehicles should be charged in open ventilated area where fumes can escape.
My Account
Recent Topics
